ALL PRODUCTS

AS/NZS Standard Tropical Structural Level 2 Fire SuitAS/NZS Standard Tropical Structural Level 2 Fire Suit

AS/NZS Standard Tropical Structural Level 2 Fire Suit

A lightweight tropical structural firefighting suit (500gsm) designed to be highly breathable with excellent levels of moisture management. Design features include articulated elbow and knee movement management, excellent break open properties and multiple fit adjusters.


FEATURES

  • 500gsm complex weight
  • Compliant to AS/NZS 4967:2009
  • Available in a range of colours
  • FR Reflective meeting EN469:2005
  • AS/NZS 4602.2:2013 Classification 2
  • New Zealand made

 

SEARCH & RESCUE OPERATIONS WET WEATHER JACKET

SEARCH & RESCUE OPERATIONS WET WEATHER JACKET

A premium New Zealand made breathable and waterproof operations jacket, specifically designed to meet every requirement of the operator in the all weather conditions they  face in the tough search and rescue environment


Features

  • Hardhat compatable 3 point adjusting hood with a wire peak and slimline foldaway design
  • Neoprene pack wear shoulder pads
  • Double storm flap design, able to be opened and adjusted by a gloved wearer. Two way performance main zip with all zips having pullers to allow to be worked with gloves
  • 4 point waterproof zip venting system for upper body air movement
  • Adjustable outer and inner cuff design that is compatable with gloves
  • Easy access internal chest pocket for maps and with key hook – accessed under the zip flap without opening the garment
  • Mesh liner for sweat wicking and advanced comfort
  • Multiple chest pockets, front pockets and handwarmers, all with closure systems to prevent snagging.
  • Articulated elbow design for maximum movement
  • Reflective Reflexite™ strips in strategic points
  • Hi Vis design with Three layer breathable upper and Two layer breathable lower to give top performance for weight ratios
  • Longer tail protection design
  • Removable fleece in handwarmer pockets. Also drain mesh design in pockets to filter water out
  • Internal waist drawcord
  • Pin back design to allow to be worn with a climbing harness.
  • This garment has features protected under patent NZ581455

 

EN Standard Tropical Structural Level 2 Fire SuitEN Standard Tropical Structural Level 2 Fire Suit

EN Standard Tropical Structural Level 2 Fire Suit

A lightweight tropical structural firefighting suit (500gsm) designed to be highly breathable with excellent levels of moisture management. Design features include articulated elbow and knee movement management, excellent break open properties and multiple fit adjusters.


FEATURES

  • 500gsm complex weight
  • Compliant to EN 469:2005
  • Available in a range of colours
  • FR Reflective meeting EN469:2005
  • New Zealand made

 

SEARCH & RESCUE SUPPORT WET WEATHER JACKET

SEARCH & RESCUE SUPPORT WET WEATHER JACKET

A premium New Zealand made, waterproof search and rescue support jacket for support personel who require a more basic jacket for their support role in search and rescue missions


Features

  • Hardhat compatable 3 point adjusting hood with a wire peak and slimline foldaway design
  • Neoprene pack wear shoulder pads
  • Double storm flap design, able to be opened and adjusted by a gloved wearer
  • Adjustable outer and inner cuff design that is compatable with gloves
  • Easy access internal chest pocket for maps and with key hook – accessed under the zip flap without opening the garment
  • Mesh liner for sweat wicking and advanced comfort
  • Multiple chest pockets, front pockets and handwarmers, all with closure systems to prevent snagging.
  • Articulated elbows
  • Reflective Reflexite™ bands in strategic points
  • Hi Vis design with Three layer breathable upper and Two layer breathable lower to give top performance for weight ratios

 

AS/NZS Standard Tropical Structural Level 2 Fire SuitAS/NZS Standard Tropical Structural Level 2 Fire Suit

AS/NZS Standard Tropical Structural Level 2 Fire Suit

An entry level structural fire suit, made from an intimate blend of meta-aramid and para-aramid with an “all in one” moisture management membrane compliant to AS/NZS 4967:2009. Design features include new generation construction technology, articulated elbow and knww movement management and multiple fit adjusters.


FEATURES

  • Colour Navy
  • compliant to AS/NZS 4967.2009
  • 600gsm complex weight
  • FR Reflective meeting EN469:2005
  • New Zealand made

 

BREATHABLE WET WEATHER SAFETY JACKET

BREATHABLE WET WEATHER SAFETY JACKET

A premium New Zealand made two toned breathable wet weather jacket designed for industrial use, meeting the TTMC and AS/NZS standards


Features

  • Neoprene recessed cuff’s with adjusters
  • Double storm flap with dome closure
  • Hand-warmers & front storage pockets
  • Upper notebook pocket with waterproof zip
  • Meeting AS/NZS 4602.1:2011 Class D/N and TTMC Standards.
  • rated breathability 16,000 and 13,000 waterproof
  • Two way zip with chin protector
  • Mesh lining for added sweat wicking & breathability
  • Hardhat compatible hood with inline adjusters & no floating chin flap
  • Slim-line foldaway hood with wire peak
  • No shoulder seams
  • Made in New Zealand
  • Available Orange/Navy
  • Sizing Small to 3XL

 

BREATHABLE WET WEATHER JACKET NAVYBREATHABLE WET WEATHER JACKET NAVY

BREATHABLE WET WEATHER JACKET NAVY

A premium New Zealand made highly breathable wet weather jacket with a fold away hood, designed for industry and rated to 13,000mm waterproof


Features

  • Neoprene recessed cuffs with adjusters
  • Double storm flap with dome closure
  • Hand-warmers & front storage pockets
  • Upper notebook pocket with waterproof zip
  • Two way zip with chin protector
  • rated breathability 16,000 and 13,000 waterproof.
  • Mesh lining for added sweat wicking & breathability
  • Hardhat compatible hood with inline adjusters & no floating chin flap
  • Slim-line foldaway hood with wire peak
  • No shoulder seams
  • Made in New Zealand
  • Available Navy, Sizing Small to 3XL

 

OILSKIN WAX SHORT SLEEVE JACKETOILSKIN WAX SHORT SLEEVE JACKET

OILSKIN WAX SHORT SLEEVE JACKET

A premium finish New Zealand made oilskin wax thermal lined short sleeve jacket.


FEATURES

  • Thermal fur liner 
  • Seamless shoulder protective design
  • Side hand warmer pockets & large front pockets with covering flap
  • Internal cell pocket
  • Extra length tail finish
  • Protective collar
  • Able to have hood attached
  • Colour Brown
  • Model wearing LG
  • Unisex design
  • Sizing SML-5XL
  • New Zealand Made

 

OILSKIN WAX LONG SLEEVE JACKETOILSKIN WAX LONG SLEEVE JACKET

OILSKIN WAX LONG SLEEVE JACKET

A premium finish New Zealand made oilskin wax thermal lined jacket


FEATURES

  • Thermal fur liner
  • Seamless shoulder protective design
  • Side hand warmer pockets & large front pockets with covering flap
  • Internal cell pocket
  • Extra length tail finish
  • Protective collar
  • Able to have hood attached
  • Model wearing MD
  • Unisex design
  • Colour Brown
  • Sizing SML-5XL
  • New Zealand Made

 

OILSKIN WAX COATOILSKIN WAX COAT

OILSKIN WAX COAT

A mid length New Zealand made premium wax coat with multiple features and a very protective design


FEATURES

  • Mid length coat
  • Side hand warmers & large front pockets
  • Double gutter storm flap
  • Easy to wear articulated arms
  • Tri adjustable foldaway hood
  • Recessed neoprene cuffs
  • Colour Brown
  • Model wearing LG
  • Unisex design
  • Sizing SML-5XL
  • New Zealand made

 

THERMAL WOOLEN UTILITIES FR JACKETTHERMAL WOOLEN UTILITIES FR JACKET

THERMAL WOOLEN UTILITIES FR JACKET

Woolen thermal FR protective utilities jacket with an attached hood


FEATURES

  • 100% wool 480gsm weight outer and 180gsm aramid viscose blend inner liner
  • Protection of workers against heat and flame to a performance level of A,B1 and C1
  • Comes as jacket with an attached hood
  • Colour Orange
  • New Zealand made

THERMAL WOOLEN UTILITIES FR PULLOVERTHERMAL WOOLEN UTILITIES FR PULLOVER

THERMAL WOOLEN UTILITIES FR PULLOVER

Woolen thermal FR protective pullover with an attached hood


FEATURES

  • 100% wool 480gsm weight outer and 180gsm aramid viscose blend inner liner
  • Protection of workers against heat and flame to a performance level of A,B1 and C1
  • Comes as pullover style garment with an attached hood
  • Colour Orange
  • New Zealand made

 

CSA STANDARD NFPA 70E BREATHABLE ARAMID RAINWEARCSA STANDARD NFPA 70E BREATHABLE ARAMID RAINWEAR

CSA STANDARD NFPA 70E BREATHABLE ARAMID RAINWEAR

CSA standard performance wet weather electric arc rated rain wear made from a 3 layer composite “Rainfire Plasma” laminate. The outer shell comprises of propriety blend of aramid rich properties, the inner membrane PPTFE being breathable and waterproof. The next to skin layer is a FR inherent scrim. 


FEATURES

  • Aramid fibres are a class of heat-resistant and strong synthetic fibres. This fibre, which handles similarly to normal textile apparel fibres, is characterized by its excellent resistance to heat, as it neither melts nor ignites in normal levels of oxygen.
  • Compliant to CSA Z96-15 class 3 / level 2
  • Meeting NFPA 70E HRC 2 18cal
  • Greater than 5000mm waterproof
  • FR to EN ISO 14116:2015
  • Highly breathable (ret <8 m2Pa/W)
  • Hardhat adaptable 3 point adjusting hood
  • Sizing SM to 5XL
  • New Zealand Made

 

ANSI STANDARD NFPA 70E BREATHABLE ARAMID RAINWEARANSI STANDARD NFPA 70E BREATHABLE ARAMID RAINWEAR

ANSI STANDARD NFPA 70E BREATHABLE ARAMID RAINWEAR

ANSI standard performance wet weather electric arc rated rain wear made from a 3 layer composite “Rainfire Plasma” laminate. The outer shell comprises of propriety blend of aramid rich properties, the inner membrane PPTFE being breathable and waterproof. The next to skin layer is a FR inherent scrim. 


FEATURES

  • Aramid fibres are a class of heat-resistant and strong synthetic fibres. This fibre, which handles similarly to normal textile apparel fibres, is characterized by its excellent resistance to heat, as it neither melts nor ignites in normal levels of oxygen.
  • Compliant to ANSI / ISEA 107-2015 Class 3, reflective Level 2
  • Meeting NFPA 70E HRC 2 18cal
  • Greater than 5000mm waterproof
  • FR to EN ISO 14116:2015
  • Highly breathable (ret <8 m2Pa/W)
  • Hardhat adaptable 3 point adjusting hood
  • Articulated elbow design
  • Lightweight and easy to wear
  • Thermal liner available
  • Available Yellow and Orange
  • Sizing SM to 5XL
  • New Zealand Made

 

AS/NZS STANDARD NFPA 70E BREATHABLE ARAMID RAINWEARAS/NZS STANDARD NFPA 70E BREATHABLE ARAMID RAINWEAR

AS/NZS STANDARD NFPA 70E BREATHABLE ARAMID RAINWEAR

AS/NZS standard performance wet weather electric arc rated rain wear made from a 3 layer composite “Rainfire Plasma” laminate. The outer shell comprises of propriety blend of aramid rich properties, the inner membrane PPTFE being breathable and waterproof. The next to skin layer is a FR inherent scrim. 


FEATURES

  • Aramid fibres are a class of heat-resistant and strong synthetic fibres. This fibre, which handles similarly to normal textile apparel fibres, is characterized by its excellent resistance to heat, as it neither melts nor ignites in normal levels of oxygen.
  • Compliant to AS/NZS 4602.1.2011 class D/N
  • Meeting NFPA 70E HRC 2 18cal
  • Greater than 5000mm waterproof
  • FR to EN ISO 14116:2015
  • Highly breathable (ret <8 m2Pa/W)
  • Hardhat adaptable 3 point adjusting hood
  • Sizing SM to 5XL
  • New Zealand Made

 

THERMAL BREATHABLE LONG SLEEVE JACKET

THERMAL BREATHABLE LONG SLEEVE JACKET

A New Zealand made thermal lined, long sleeved breathable jacket made from ultra tough European fabric


FEATURES

  • Dome down Storm Flap covering zip
  • Recessed neoprene cuffs
  • High protective collar
  • Fully thermal lined
  • All seams sealed for waterproofability
  • Reflexite 50mm Tape around waist
  • Reflexite 25mm Tape down sleeves
  • Long sleeved
  • Sizing Small to 5XL
  • New Zealand Made

 

Showing 1–16 of 20 results